The Most Innovative Wand and Tool Family in the Industry is Growing

Better Cleaning, Faster Drying, Reduced Fatigue

About the EVOLUTION Wand Technology

HydraMaster took wand and tool design to the next level with the development of the technology with the Evolution Wand Series. Using a copolymer process to rotationally mold cleaning wands has resulted in tools that are lighter, more durable, and outperform traditional stainless steel wands and tools. Through scientific testing, the Evolution Wand series was developed to smooth airflow and boost water recovery performance through laminar airflow design. Side by side comparative testing of the 1.5” Evolution Wand against many of the other types of wands available resulted in ½ of the residual moisture per square foot, and has shown unmatched performance versus any other type of wand.

The rotationally molded wand heads and aircraft aluminum tubes make the Evolution Wand Series nearly half the weight as comparable stainless steel wands and tools. Evolution wands and tools are custom fitted with a Delrin® acetyl glide with a glide holder that is molded or mounted to the wand or tool head for an airtight fit. Many aftermarket Teflon glides used on traditional wands are designed to fit a wide variety of tools and often don’t fit well and slip and slide off. The Delrin® glides are especially matched to the glide holder on each Evolution Wand giving it an airtight seal and making it easily replaceable.

Now the full line of Evolution Wands and tools provide the professional cleaner and restorer  with a wide range of problem solving and quick drying options whether using a truckmount or portable extractor, doing water damage and flood extraction, cleaning hard surface floors, or taking care of fine upholstery.

What new tools have been added to the family?

EVOLUTION RX12 Rotary  Hard Surface Wand

HydraMaster is proud to introduce the newest addition to the EVOLUTION Wand series – the EVOLUTION RX12 Rotary Hard Surface Extraction Tool. The rotationally molded flex-handle, wand head and aircraft aluminum tubes make the EVOLUTION RX12 Rotary Hard Surface Tool nearly half the weight as comparable stainless steel wands and tools. The EVOLUTION RX12 ROTARY HARD SURFACE EXTRACTION TOOL allows you to adapt to the floor you are cleaning – tile, stone, or concrete – and blasts soil and dirt from tile, grout, and smooth or rough surfaces.

The EVOLUTION RX12 ROTARY HARD SURFACE EXTRACTION TOOL  allows you to clean tile, stone, and concrete floors faster, easier and better than any other cleaning tool or system. Combined with your truckmount or high performance – high pressure portable extractor, it will  deep clean better than any automatic or robotic scrubber on the market. If you are looking for restorative deep cleaning of hard surface floors, your ability to clean surfaces at higher solution pressures with rotary jet agitation, along with your exclusive ability to quickly recover wastewater and soiling for faster drying floors, the EVOLUTION RX12 ROTARY HARD SURFACE EXTRACTION TOOL  is a better and more environmentally responsible way to clean hard surfaces floors

To really understand the power of the EVOLUTION RX12 ROTARY HARD SURFACE EXTRACTION TOOL you have to understand its cleaning action.

• It is a self-contained rotary washer and extractor, driven by water pressure. It agitates, washes and rinses the surface and immediately recovers the soil and water at the same time. It works best at solution pressures between 800-1200psi.
• Under the molded hood you will find a spray-bar and pressure-wash jets that are driven by water pressure. The EVOLUTION RX12 ROTARY HARD SURFACE EXTRACTION TOOL spins faster at higher pressures, and works with front-to-back and side-to-side motion.
• The durable handle has a 2” vacuum line all the way to the cleaning head for better air-flow and faster drying.
• The 12” cleaning path allows you to clean three times as fast as stationary hard surface wands. This saves you time, labor, and money!
• Low profile design allows the tool to get under counters

The design of the tool provides the professional cleaner and restorer with several benefits:

• The durable roto-molded handle is spaced average shoulder width apart for a smoother ergonomic cleaning that feels like the tools is floating across the floor. This design also allows the tool to work effectively for shorter or taller technicians
• The easy pull trigger helps reduce repetitive motion strain on muscles and tendons. Best of all the robust roto-mold design eliminates some of the flexing issues associated with other hard surface rotary extraction tools.
• The tool includes an easy access vacuum relief valve on the vacuum hose connection
• The heart of any rotary extraction tool is the swivel. We used the uppermost quality, proven high speed Mosmatic DXG Swivel triple bearing system that is long lasting and maintenance free. The corrosion resistant CERAMIC SEAL extends the life of your swivel.
• The EVOLUTION RX12 ROTARY HARD SURFACE EXTRACTION TOOL includes both a hard boot and brush ring for smooth or rough surfaces. The attached brush ring is used for most surfaces. The brush bottom prevents trapping particles that could scratch soft floors, especially sensitive stone surfaces. The brush may also be preferred on very flat floors when the plastic body forms a tight seal making the tool harder to move. It can easily be removed easily with four screws.

EVOLUTION Stair Wand

The Evolution Stair Wand has a rotationally molded head, Delrin Glide, and is a wand designed to clean stairs and hard to reach places. It comes with a 10″ head and has a single jet. The Evolution Stair Wand is lighter and more durable than stainless steel stair wands and tools. Features of the new Evolution Stain Wand include:

• Through scientific testing, the Evolution Stair Wand was designed to smooth airflow and boost water recovery performance. A rotationally molded head and aircraft aluminum tube make the Evolution Stair Wand lighter than most other stair wands or tools and more durable
• Ergonomically angled wand tube for fatigue reduction
• Laminar like airflow design improves airflow, increases extraction performance, and reduces drying time – leaves less residual moisture
• Delrin glide is mounted to the rotationally molded head for airtight fit and no slippage
• Brass check valve/stainless steel Inline filter with brass quick-connect prevents clogging and is easy to clean out
• 10” head with single jet spray application
• Part # 000-163-759

Click here to learn more about the EVOLUTION Stair Wand or to order

Click here to see a video about the EVOLUTION Stair Wand

EVOLUTION Glided Upholstery Tool

The Evolution Glided Upholstery Tools has a rotationally Molded Head with a Delrin® Glide. The 4″ head a single angled jet spray. This durable, rotationally molded tool is lighter than conventional steel upholstery tools, reducing hand and wrist fatigue in upholstery cleaning. The Evolution Upholstery Tool was designed to smooth airflow and boost water recovery performance as compared to the harsh angles of a steel tool. Best of all, the glided head moves across the upholstery fabric better and increases water recovery. Features of the Evolution Glided Upholstery Tool include:

• The cleaning angle of the single jet shears across the fabric rather than directly down onto it greatly reducing your chances of over-wetting.
• Rotationally molded to reduce weight and increase durability
• Laminar like airflow design improves airflow, increases extraction performance, and reduces drying time.
• Ergonomically designed to reduce operator fatigue and ensure proper recovery when cleaning surfaces with unique geometry.
• Delrin glide is mounted to the rotationally molded tool head for airtight fit and no slippage
• Plastic glide is less likely to develop burrs than a steel tool head which could damage delicate upholstery fabrics. Also, glide can be replaced when worn
• The recommended cleaning solution pressure for the tool is 40-80 psi. The valve is rated to 1200 psi. The part number is 000-163-617.
  

  Click here to learn more about the EVOLUTION Glided Upholstery Tool or to order

  Click here to see a video about the EVOLUTION Glided Upholstery Tool

EVOLUTION Wand Holder/Rack

You can finally quit fumbling around in the back of their van or work vehicle trying tofind the right place for their wands. Those clips don’t hold up and often don’t fit, but they still need to clear floor space and have a place where their  technicians know the wand always goes.  The Evolution Multi-Purpose Wand Rack/Holder is designed to provide a more professional look to your van, while simultaneously increasing your van organization and efficiency. It protects your wands, and all of the other contents of your van from damage being inflicted by falling wands.

• The Evolution Multi-Purpose Wand Rack is manufactured with black durable HDPE plastic that is corrosion resistant. It is available in a 1.5” version and a 2” version.
• The 1.5” version is specifically designed to hold the 1.5 Evolution Wand or Evolution Stair Wand. It will also hold most standard stainless steel 1.5” wands and some 1.5” “S” Bend stainless steel wands. The 2” version is designed to hold the 2” Evolution Wand and the 2” Titanium Evolution Wand. It will also hold most standard stainless steel or Titanium 2.0” wands and some 2.0” “S” Bend stainless steel wands.
• The auto-secure tensioner “locks” the wand in place so it will not fall out, even when making sudden stops or turning sharp corners.
• The rack can be mounted either to the side of the van or the roof. An added slot will simultaneously store and hold a carpet grooming tool or rake (van side-mount only).
• Three additional holes on the rack allow you to use bungee cords/wraps to store other hoses and accessories in place.
• Standard kits come with two brackets and recommended mounting is directly to the rib of the van. Two kits can be mounted on one wall to hold multiple wands
• The EVOLUTION WAND RACK comes as a two bracket kit.

Click here to learn more about the EVOLUTION Wand Rack or to order

Click here to see a video about the EVOLUTION Wand Rack

Want to meet the rest of the family?

1.5” EVOLUTION Wand for Truckmounts or Portables

Rotationally Molded Delrin Glide Carpet Cleaning Wand (13” head, 2 jet)

• Rotationally molded to reduce weight and increase durability
• Laminar airflow design improves water recovery, increases extraction performance, and reduces drying time
• Laboratory tested to leave less residual moisture in the carpet
• Delrin glide holder is rotationally molded into the wand head for airtight fit and no slippage
• Designed to be used with both truckmounts and portable extractors (all jet sizes included)
• Part #  000-163-034

Click here to learn more about the 1.5″  EVOLUTION Wand or to order

Click here to see a video about the 1.5″ EVOLUTION Wand

2.0” Truckmount EVOLUTION Wand

Rotationally Molded Delrin Glide Carpet Cleaning Wand (16” head, 6 jet)

• Rotationally molded to reduce weight (only 8.8#) and increase durability
• Laminar airflow design improves airflow, increases extraction performance, and reduces drying time
• 2” diameter vacuum tube increases airflow for faster drying and fits perfectly to 2” vacuum hose without the need for reducing couplers that can limit performance
• 6 stainless steel spray jets are strategically placed on the stainless steel spray bar for maximum coverage, and the wide 16” cleaning head increase productivity by 30% over 1.5” wand
• Part # 000-163-035

Click here to learn more about the 2″  EVOLUTION Truckmount Wand or to order

Click here to see a video about the 2″ EVOLUTION Truckmount Wand

EVOLUTION Titanium 2” Wand

Rotationally Molded Head, Titanium Tube, Delrin Glide Carpet Cleaning Wand (16” head, 6 jet wand) – The lightest head and the lightest and most durable wand tube

• Designed for maximum corrosion resistance, yet 2lbs. lighter than a 2” stainless steel wand
• Flow control orifice keeps maximum control over flow and reduces clogging
• Durable, yet lightweight
• Titanium tube
• Rotationally molded to reduce weight and increase durability
• Laminar airflow design improves water recovery which increases extraction performance and reduces drying times
• Part # 000-163-054

Click here to learn more about the 2″  TITANIUM EVOLUTION Truckmount Wand or to order

EVOLUTION  Flood Extraction Wand

Rotationally Molded Head, Delrin Glide Water Extraction Wand (16” head)

• The Aluminum tube and Rotomold head make it extremely lightweight helping reduce fatigue on the technician. The sealed Delrin® glides help push the wand across the carpet, and are tapered to keep a good seal on the fibers.
• No other tool has made such a dramatic increase in soil and water recovery due to its laminar airflow design
• Part # 000-163-058

Click here to learn more about the 2″  TITANIUM EVOLUTION Truckmount Wand or to order

For more information about the new tools or any tool in the Evolution Wand Series, click here and we will send you the very latest information