TITAN H2O – Professional Flood Extractor

SKU: 750-010-743-10


TITAN H2O Flood Extractor

✅ Massive Power for Fast Extraction: 32.5HP liquid-cooled engine with 400+ CFM to handle extra-long hose reaches and dual wands for quick drying.
✅ Engineered for Simplicity: 75% easier to operate than a traditional truckmount and requires 50% less maintenance for maximum uptime.
Built for Major Water Removal:
✔ Flood Water Extraction ✔ Residential & Commercial Water Damage ✔ High-Volume Water Recovery ✔ Fast Structural Drying ✔ Large-Scale Restoration Projects

Standard Equipment

Every TITAN H2O comes van-ready with:

  • 32.5HP Liquid-Cooled Engine with Electric Keyless Start

  • Dominator™ Tri-Lobe 4007 Blower (400+ CFM)

  • 100 Gallon MaxAir™ Recovery Tank with Stainless Filter

  • Factory Dual Wand Plumbing & Outlets

  • Runtime Hour Meter

  • Vacuum Gauge (0-30″ Hg)

  • Pre-wired APO (Automatic Pump-Out) Switch

  • Electronic Throttle Control

  • Fuse-Protected Electrical System & Battery Box

  • Complete Van Installation Kit

  • 10 ft x 1.5″ Wand Whip Line

  • Operation & Maintenance Manual

  • ClubHydraMaster Leather Patch Ball Cap

The TITAN H2O is the specialist’s choice for major flood work. Purpose-built from the ground up for water damage restoration, it combines the massive power of a 32.5HP liquid-cooled engine and 400+ CFM vacuum with a radically simplified design. It’s 75% easier to operate and requires 50% less maintenance than a traditional truckmount, giving restoration pros the speed, reliability, and extreme water recovery needed to handle any residential or commercial disaster, achieve quick dry times, and get properties back to normal faster.

Top Features:

✅ Purpose Built for Restoration: easily tackle Flood/Water Extraction Work!

✅ No need to worry about freezing temperatures: The Titan H20 can handle even the lowest of temperatures!

✅ Undisputed Power: Reliable, durable liquid cooled engine power and 4007 vacuum blower


Find Local Authorized Distributor

Configure Your TITAN H2O for Restoration


Why Restoration Pros Choose the TITAN H2O

Emergency Ready: Deploys fast with simple, reliable operation so you can start extracting water immediately, not troubleshooting machinery.
Reduced Downtime: The 50% lower maintenance requirement and easy-access design mean more time generating revenue, less time on repairs.
Built for the Big Jobs: From a flooded basement to a commercial water main break, the 32.5HP engine and 100-gallon tank have the endurance for large losses.
Specialist Efficiency: Unlike multi-purpose truckmounts, every component is optimized for one task: extreme water extraction, making it the most efficient tool for the job.

Clean Virtually Every Hard Surface With Confidence

With this truck mount, you can professionally clean nearly virtually every hard surface your customers have. Tile, grout, vinyl, LVP, laminate, stone, and other hard surfaces are all fair game and deliver dramatic, high-impact results.

An easy way to close more hard surface jobs is to offer a free 3 ft x 3 ft test clean in a visible area. Most homeowners say yes immediately because there is no risk and no pressure. Once that small section is cleaned, the difference is obvious. The cleaned area looks dramatically brighter and fresher, while the surrounding floor instantly looks darker and grimier by comparison.

At that point, customers almost always ask you to continue with the rest of the flooring for two simple reasons. First, the test spot proves how effective the cleaning really is. Second, once they see how dirty the rest of the floor looks next to the cleaned area, they do not want to leave it that way. This simple demo turns hesitation into an easy yes and consistently adds more revenue to every job. Customers don’t typically view their hard surface floors as NEEDING a cleaning, so if you do this test they will see the value.

Technical Specifications

Power & Drive:

  • Engine: 32.5HP Industrial Liquid-Cooled Engine

  • Ignition: Electric Keyless Start

  • Control: Electronic Throttle Control

  • Fuel Use: 1.7 GPH at 300 PSI

Vacuum & Recovery System:

  • Blower: Dominator™ Tri-Lobe 4007 Blower

  • Performance: 400+ CFM for Fast Drying

  • Recovery Tank: 100 Gallon MaxAir™ Tank (Standard)

Physical Specifications:

  • Dimensions: 26″W × 39″H × 45″D (Slide-In)

  • Weight: 775 lbs

  • Maintenance: Sight Windows for Oil Level Checks

  • Access: Magnetic Panels for Easy Service

Hose & Wand:

  • Vacuum Hose: 100 ft x 2″ (Standard Length)

  • Wand Capacity: Dual Wand Plumbing (Standard)

  • Whip Line: 10 ft x 1.5″ Wand Whip Line (Included)

Options & Upgrades

Optimize your flood fighter with these professional add-ons:

✅ Evolution Flood Wand: The dedicated tool for efficient water removal across large, flat surfaces.

✅ Extended Vacuum Hose (150′-300′): Reach further without moving the truck, perfect for large buildings.

✅ Secondary Extraction Tools: Upholstery and stair tools for comprehensive water removal.

The HydraMaster Hassle-Free Ownership Experience

Every TITAN H20 is backed by our industry-leading commitment to your success:

✅ Comprehensive 2-Year Warranty: Full “bumper to bumper” coverage across the entire machine with no “limited” exceptions.

✅ Local Expert Support: Nationwide network of authorized distributors for complete warranty and service.

✅ 24/7/365 Technical Support: Unmatched access to our expert team via phone, online, and app-based troubleshooting.

✅ Streamlined Service: Faster, easier warranty process to get you back to work quickly.