HM-FloodKing-Main

Flood King

The Flood King from HydraMaster is designed to be the most efficient and effective way to extract water from carpet at any water damaged facility.

Where to Buy!

 

SKU: FLOODKING Category:

Product Description

Portable Flood Water Extractor for Restoration

The Flood King from HydraMaster is designed to be the most efficient and effective way to extract water from carpet at any water damaged facility.

This new and innovative design has increased the efficiency of the airflow by top mounting dual 3-stage vacuums, thus eliminating stand-pipes and bends into the tank. This significantly reduces testrictions in airflow and increases efficiency. Powerful yet efficient, the 3-stage vacuums only use 13 Amps of power with one cord which is ideal for flooded sites where power may be limited.

The Flood King’s ergonomic and lightweight design makes it easy to handle by one person with little or no bending or stooping. Large rear wheels carry the Flood King up and down stairs or nearly anywhere you need it to be, to complete the job with little effort or strain.

To increase productivity, two (2) diaphragm bilge pumps automatically and continuously remove the waste water from the 9 gallon recovery tank through a standard 3/4″ garden hose at 10.5 GPM, thus eliminating the need to
stop and empty the tank.

For power and versatility, test-drive the Flood King from HydraMaster today and see the difference high quality and innovation can make at your next restoration cleanup job.

 

• Power Cord: One, 25 ft., 12 gauge, 3-wire hospital grad plug
• Power Consumption: 13Amps
• Recovery Capacity: 9 gallon
• Vacuum Intake Hose: 2″ x 25′
• Vacuum Motors: Two 3-stage vacuums
• Waterlift/CFM: 100″/170 CFM
• Air Watts: 520 AW (in operational range)
• Overflow Protection: Electronic float I Auto ON/OFF
• Discharge Pumps: Two diaphragm bilge pumps
• Discharge Hose: One 3/4″ x 50′
• Discharge Rate: 10.5 GPM
• Filter System:
One 80 micron polyester mesh strainer at the water inlet to the recovery tank.
Two 50 mesh S/S filters in recovery tank
Two 50 mesh S/S screens in-line
• Weight: 88 lbs.

Includes:
2″ x 25″ Vac Hose
50′ Dump Hose

Inquire for 240V pricingd hose storage

Flood Extractor Comparison – Flood King vs Competition

Airflow CFM @ 1.5″ Orifice
Competition = 115.8 CFM
Flood King = 137 CFM (18.3 % higher)

Total Current Draw @ 1.5″ Orifice
Competition = 20.4 AMPS
Flood King = 14.7 AMPS (38.8% lower)

Dump Rate Through 50′ of 3/4″ hose (both machines come standard with threads for 3/4″ hose)
Competition – 8.56 GPM
Flood King = 9.1 GPM (6.3 % higher)